Published in Blog

Using the NetLink Control Outputs Featured

Tuesday, 30 August 2016 14:12 Written by 

By now you are probably well aware of the NetLink's monitoring abilities and the added monitoring and control provided when an M8 board is used in conjunction with the NL4.  But did you know that both the NL2 and NL4 have two control outputs which can be used to control external relays or other devices?

Screenshot 1 Callouts

The control outputs can be used when basic control is needed without the full ISCAN functionality.  Our latest application note AN25 goes in-depth on using these control outputs to control individual devices or groups of devices, as well as other uses.   It can be found here:

http://www.lifesafetypower.com/docs/an25_netlink_control.pdf

If you have any questions on using the NetLink's control outputs or need any other assistance, our This e-mail address is being protected from spambots. You need JavaScript enabled to view it department is here to help.

Last modified on Tuesday, 30 August 2016 14:18
Read 1246 times
Rate this item
(0 votes)
Mike

LifeSafety Power Technical Support and Applications
mbone@lifesafetypower.com
(
888)577-2898 x203

Website: www.lifesafetypower.com