Learning Center Downloads
|
Below are the latest firmware revisions for products using firmware. Consult the product's user manual for update instructions. Please read our Cyber-security Guidelines Sign up for our Firmware Updates Mailing List to receive email notification when a new firmware revision is available! *If NL2 or NL4's firmware to be upgraded is below rev 7.15, then firmware must first be upgraded to rev 7.15 before upgrade to rev 8.10. See below for bridge updates **If NL2 or NL4's firmware to be upgraded is below rev 8.10, then firmware must first be upgraded to rev 8.10 before upgrade to the latest version. If firmware is below 7.15, firmware must be upgraded to 7.15 before upgrading to 8.10. See below for bridge updates Note The browser history / cache should be cleared after performing the firmware upgrade and before accessing the device again to prevent any cached pages from giving outdated information These bridge updates must be installed before updating to the newest firmware revision if the currently installed firmware is below the bridge revisions. Note that these are not the newest firmware - see above for the latest revision The NetLink NL2 and NL4 modules are able to be integrated into many Access Control pannel interfaces. Current integrations include: BluBOX Mercury Security Feenics RS2 Technologies Genetec Software House Some integrations require files from LSP to operate. See the appropriate tab for these files. Contact the Access Control manufacturer for more information on these integrations. MSM Enterprise is a software-based package allowing user to assess,manage,and monitor systems using NetLink anywhere in the world. This firmware should only be installed in applications where the NetLink is being integrated into the Mercury reseller’s interface when using EP Series controllers. LP Series controllers can use the standard NetLink firmware. Check with your Mercury reseller to see if they have enabled NetLink integration. All required bridge updates must be installed before this update. Software to integrate NetLink devices into the Genetec Security Center interface using the LSPEntity Software. License must be obtained from
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
using part number GSC-1SDK-LSP-NetLink. Driver to integrate NetLink devices into the CCURE 9000 interface. License must be obtained from Software House. Check the compatibility matrix for requirements. Below is the latest firmware revision for the NetPower NPR. Consult the NetPower NPR user manual for update instructions. Note The browser history / cache should be cleared after performing the firmware upgrade and before accessing the device again to prevent any cached pages from giving outdated information. Software package for finding LSP Devices and their IP addresses on a local network using a PC. Software package for use with a DATALINK cable to interface a PC with an FPO power supply through USB. Note that this software is not required for NetLink modules. These products are discontinued - The download here is the last Firmware revision. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||